Humidity Matters

25 May 2016 2 Comments 0 Trackbacks Palo Duro Hardwoods

By Tom Ruekert | Vice President of Sales & Operations

Relative humidity in wood flooring matters. A lot. Understanding it is crucial to success – and failure – of a floor’s performance after installation.

So here are the basics every wood flooring contractor and every homeowner that has – or wants to have – wood flooring in their home needs to know. And if you are a contractor or homeowner in our home state Colorado, we have an extra challenge to talk about. I’ll get to that in a minute.

What is relative humidity? It is the amount of moisture vapor in the air compared to how much that air can hold at a given temperature before the moisture condenses as dew.

How does relative humidity affect wood flooring? Higher humidity causes wood flooring to expand, as the flooring absorbs moisture from its environment. Drier conditions cause wood flooring to shrink. To an extent, those fluctuations are tolerable, and they are to be expected with seasonal changes.

In general, temperature and humidity control inside a home is the linchpin for maintaining consistent wood flooring performance.

Proper Relative Humidity for Wood Flooring

Professional wood flooring installers should follow manufacturers’ guidelines, which often call for 35% to 55% relative humidity.

If that information from a manufacturer is not known, the secondary resource to follow is the Installation Guidelines of the National Wood Flooring Association (NWFA). The NWFA uses a 30% to 50% range.

But those numbers are only guidelines. The reality varies depending on regional climates. In the U.S. alone, the variety from the swamps of the Southeast, for example, to the high and dry climates of Colorado causes a need for local expertise.

Who Is Responsible for Relative Humidity Control? The home owner is responsible for the ongoing control of temperature and humidity in the home.

Assuming the professional installer properly acclimated the wood flooring to the home environment, and properly evaluated the moisture content within the subfloor and flooring prior to installation, the homeowner is responsible for the ongoing performance of the floor.

Typical heating and cooling of the home should be sufficient for controlling temperature. A basic humidity and temperature monitor can be purchased at local big-box stores or online for less than $10. In a large or multi-level home with wood flooring throughout, consider placing more than one monitor in separate areas or on different levels.

In Colorado the relative humidity often is around 20%. This requires use of a humidifier to increase the relative humidity in the home to the minimum recommended 30%. In wetter regions of the country, a dehumidifier might be needed.

Bottom Line

It’s this simple: Maintain the relative humidity in your home, maintain your floor.

Stay up to speed with the Palo Duro Blog, new products, training and other opportunities. Signup for Palo Duro's email newsletter.

Tom Ruekert

Tom is Vice President at Palo Duro Hardwoods. He started his wood flooring career sanding floors as a teenager. Since, he has developed his expertise in distribution sales and management.


  • Joe Revord
    08-Jun-2016 12:36 PM

    Thank you for posting this very important piece of information! This is a topic that is highly misunderstood and over looked within our industry.

  • Julio Vega
    10-Jan-2017 05:02 PM

    Well Done!

Leave Comments

Captcha Image
Trackback Link
Post has no trackbacks.

Recent Posts



contact us

Fill out the form below to request that Palo Duro get in touch with you


  Call Us

(303) 375-0280


12875 E. 42nd Ave., Denver, CO 80239
View Map

Connect with Us